Becker 4935 200 045 0 Manual Del Usuario página 8

Technical Information
Connecting an external signal lamp
Undo the two screws on the back of the programming unit and remove the cover.
Caution
Electrical connections may only be carried out by a qualified electrician.
Prior to installation, the power supply must be disconnected. After con-
necting the signal lamp, strain relief and a touch protector must be se-
cured.
With a signal lamp, you can also have the confirmations displayed visually.
Visual responses are not available in the radio mode, but are available exclusively in the
wired mode.
Confirmation
8
de en fr
es it cs
Becker-Antriebe GmbH
Friedrich-Ebert-Str. 2-4
35764 Sinn/Germany
www.becker-antriebe.com
nl
tr