Setting Via Decade Keys - Kübler CODIX 924-4 Manual Del Usuario

becomes passive with negative
direction and when count < zero
and subsequently with positive
direction and when count > zero
Duration of timed signal of
Output 1, programmable from
00.01 to 99.99 s.
Timed output is post-triggered.
7.8.6.7 Submenu for Preset 3 and 4
Only preset 3 is represented here
Submenu for Preset 3 [4]
ADD mode output operations:
permanent signal at Output 3 [4],
becomes active when count >
Preset 3 [4]
SUB mode output operations:
permanent signal at Output 3 [4],
becomes active when count <
Preset 3 [4]
ADD mode output operations:
permanent signal at Output 3 [4],
becomes passive when count >
Preset 3 [4]
SUB mode output operations:
permanent signal at Output 3 [4],
becomes passive when count <
Preset 3 [4]
ADD mode output operations:
timed signal at Output 3 [4],
becomes active when count >
Preset 3 [4]. (Activation only in
positive direction)
SUB mode output operations:
timed signal at Output 3 [4], wird
becomes active when count <
Preset 3 [4]. (Activation only in
negative direction)
ADD mode output operations:
timed signal at Output 3 [4],
becomes passive when count >
Preset 3 [4]. (Deactivation only in
positive direction)
SUB mode output operations:
timed signal at Output 3 [4],
becomes passive when count <
Preset 3 [4]. (Deactivation only in
negative direction).
ADD mode output operations:
timed signal at Output 3 [4],
becomes active with positive
direction and when count >
Preset 3 [4] and subsequently
active with negative direction and
www.kuebler.com
when count < Preset 3 [4]
SUB mode output operations:
timed signal at Output 3 [4],
becomes active with negative
direction and when count <
Preset 3 [4] and subsequently
active with positive direction and
when count > Preset 3 [4]
ADD mode output operations:
timed signal at Output 3 [4],
becomes passive with positive
direction and when count >
Preset 3 [4] and subsequently
passive with negative direction
and when count < Preset 3 [4]
SUB mode output operations:
timed signal at Output 3 [4],
becomes passive with negative
direction and when count <
Preset 3 [4] and subsequently
passive with positive direction
and when count > Preset 3 [4]
Duration of timed signal of
Output 3 [4], programmable from
00.01 to 99.99 s.
Timed output is post-triggered.
Active:
Relays are activated when the
preset value is reached.
Passive:
Relay becomes de-energized
when the preset value is
reached.

7.9.1 Setting via Decade Keys

In operating mode Preset 4 will be displayed in the
lower line, excepted for the output operations
AddBat and AddTot.
Press the Prog/Mode key until
the preset to be changed is
displayed -
or
Press any decade key
Õ
Display switches to the editor mode
Set the desired preset value
using the decade keys
, ,
.
Seite 15