Safety Information - Oase biOrb CLASSIC Instrucciones De Uso

SAFETY INFORMATION

• Do not expose the unit to direct sunlight.
• Never carry or pull the unit by the electrical cable.
• Route cables such that they are protected from damage
and do not present a tripping hazard.
• Only connect the unit if the electrical data of the unit
and the power supply correspond.
• Only connect the unit to a correctly fitted socket.
• Protect the plug connection from moisture.
• When using heaters, ensure that they are approved for
use in the aquarium and that they do not come into
contact with the acrylic wall of the aquarium.
• Disconnect the power plug before carrying out any
work on the unit.
• Only open the unit housing or its attendant components
if this is explicitly specified in the operating instructions.
• Never carry out technical changes to the unit.
• Exclusively use biOrb cleaning product to clean the
aquarium. Other cleaning agents may cause scratches
or tears in the acrylic material.
• Only use original spare parts and accessories for the unit.
For the complete operating manual, visit
www.biorb.com
EN