HT Italia RCDX10 Manual De Instrucciones página 2

 Copyright HT ITALIA 2014
USER MANUAL
Accessory RCDX10 is a current multiply ring which can be used for measurements on earth leakage relay
tester RCD with nominal current up to 10A connected with the instruments MACROTESTG3 and COMBIG3
Before using the accessory please carefully read the following warnings:

Do not connect RCDX10 to points of installations in which there is a measurement
category higher than CAT III 300V to ground

With RCDX10 connected both to the instrument and to the ground do not touch the
internal parts of the two connectors with open jaws

We recommend following common safety rules devised by the procedures for carrying out
operations with RCDX10 on live systems and using the prescribed PPE to protect the user
against dangerous currents and the accessory against incorrect use

Connect the ring to the earth leakage relay tester paying attention that the arrow on
it should as the same direction as the current flowing on the line (see Fig.1)

Always connect the cable corresponding to number "1" to the instrument and the cable
corresponding to number "2" to the ground (see Fig.1)
Fig.1: Connection of the accessory RCDX10
2
CAUTION
RCDX10
Release 1.00 - 14/03/2014