Preference Page - Soundstream H-500Di Manual De Instrucciones

One-Touch Standby
When you press and hold button, all the
connected HDMI CEC devices (if the device
supports one-touch standby) swith to standby
mode simultaneously.
On
Select this to turn on one-touch standby function.
Off
Select this to turn off one-touch standby function.
Note:
If no display appears on the TV screen due to
unsupported resolution, reconnect any available
interlace video output to your display and re-
adjust the resolution settings to 480p/576p.

Preference Page

Notes:
You can't set TV type until HDMI is set to off.
TV Type
Pal
Select this when the unit is connected to a PAL TV.
Auto
Select this when the unit is connected to a Multi TV.
NTSC
Select this when the unit is connected to an
NTSC TV.
PBC
On
Select this to turn on PBC function.
Off
Select this to turn off PBC function.
Audio, Subtitle, Disc Menu
You can select a preferred language for audio,
subtitle and disc menu.
When you select a preferred language that is

not recorded on the DVD, one of the recorded
languages is automatically selected.
You can override the Audio setting in the Setup

menu by pressing the AUDIO button on the
remote control unit while a DVD disc is playing.
You can override the Subtitle setting in the Setup

menu by pressing the SUBTITLE button on the
remote control while a DVD disc is playing.
Select Off to turn subtitles off. Note that subtitles

on some discs cannot be removed even when
you select Off.
Parental
Play back of some DVD discs can be limited
depending on the age of the users. The parental
control system allows the playback limitation level to
be set by the parent.
Note:
The lower the level, the stricter the limitation.

If the rating of the loaded DVD disc is higher

than the level you set, the system will require a
password. Enter your password and press the
ENTER button to start playback.
1 Select the desired parental control level from the
menu, then press the Enter button.
2 You will be prompted to enter your password.
Use the 0-9 buttons to enter 000000 (or your
privacy password if already established).
No need to enter a password if "Password Mode"

is set to OFF.
Password
Password Mode
You can temporarily unlock discs for playback
according to the level.
To change this setting, select On or Off, enter
your password, and press the ENTER button.
On
You need a password to change the level of
parental control.
Off
You can change the level of parental control
without a password. You cannot temporarily
unlock discs for playback.
Password
You can set a new password for parental control.
The default password is 000000.
1 Select "Change" and press the ENTER button.
2 Enter 000000 (or your privacy password) using
the 0-9 buttons.
3 Enter a new password.
4 Enter the same password again to confirm.
5 Press Enter button.
Note:
You will need your password to change the level
of control in the future as well as to temporarily
unlock discs for playback.
If you forget your password, use 000000.
Default
All the items in the Setup menu (except for the
password and parental control) will be reset to the
default settings.
15