Connections; Connect To Fm Antenna; Connect To Tv - Soundstream H-500Di Manual De Instrucciones

25
MENU
For video discs: Access or exit disc menu.
For video disc with playback control: turn on/off
PBC.
For USB/data disc playback: switch between
folder/file list/program list.
26
/

G
Skip to next title/ chapter/ tracks.
Navigate right through menus.
Search forward within a track/disc.
Tune to a radio station by searching forward.
27
MUTE
Press this button to mute or resume the sound.
28
SLEEP/TIMER
Set sleep timer
Set alarm timer
29
CLOCK
Display current clock
(Press and hold in standby mode) activate clock
setup.
30
OSD
Display play information on TV.
31
SHUFFLE
Select shuffle play modes
32
DIM
Adjust brightness level of display panel.
33
ZOOM
Zoom in/out image on screen.

Connections

Connect to FM Antenna

Connect the supplied FM wire antenna to the
FM antenna socket on the unit.
If reception is poor, connect the outside antenna.
Note:
Before attaching a 75 ohm coaxial lead (the
kind with a round wire going to an outside
antenna), disconnect the supplied FM wire
antenna.
Caution:
To avoid noise, keep antennas away from the
system, the connecting cord and the AC power
cord.

Connect to TV

IMPORTANT!
- You only need to make one video connection
from the following options, depending on the
capabilities of your TV.
Note:
- Connect the DVD system directly to the TV.
1 Using COMPONENT socket
- Connect a progressive scan TV through
component video for higher quality video.
- Connect component video cables(red/blue/
green-not supplied) to:
The VIDEO OUT (Y Pb/Cb Pr/Cr)sockets on this

unit.
The component video input sockets on the TV.

Note:
- The progressive scan video quality is only
available when a progressive scan TV is
connected.
- If your TV does not support progressive scan,you
cannot view the picture.
- For how to activate progressive scan on your
TV, refer to the TV user manual.
The component video input jack on the TV might be
labeled as Y Pb Pr or YUV.
2 Using AV OUT socket
Connect audio cables to:
- The AUDIO OUT R / L sockets on this unit.
- The audio input sockets on the TV or other
external audio device.
Connect the composite video cable to:
- The VIDEO socket on this unit.
- The video input socket on the TV.
7