Dri-Eaz AirPath F366 Manual Del Usaurio página 3

Monthly Maintenance
Clean Components
:
•
Using a Phillips #2 screwdriver, unscrew the four
screws connecting the bottom grill and the wire
support grill behind it. Carefully lift off bottom grill.
CAUTION! Watch for pinch points when handling grill;
careless handling could result in injury.
•
Next, inspect blades for dirt, dust and debris. If dirty,
wipe down the blades with a damp cloth.
•
Use a vacuum or a damp cloth to remove lint and dust
from motor and grill covers. WARNING! Do not allow
water into the motor. A buildup of lint and dust will
reduce the airflow and may cause the motor to
overheat and become a fire hazard.
Inspect Motor
: Look for debris or damage to motor.
Call an Authorized Service Center, or the Dri-Eaz Service
Department for help at 888-867-3235 or (360) 757-7776.
Do Not Wet Motor
: To prevent damage to motor, do not use
a hose or pressure washer to clean the unit. If motor becomes
wet, let motor dry before using again. WARNING! Keep motor
dry, a wet motor could result in personal injury.
Exterior Inspection
: Evaluate exterior components and make
sure they are properly installed. If you hear any abnormal
sounds when running the unit, call an Authorized Service
Center or the Dri-Eaz Service Department at 888-867-3235 for
information on parts or repairs.
07-01570B 03-06 Copyright 2007 Dri-Eaz Products, Inc.
SPECIFICATIONS
Model
Weight
Dimensions (HxD)
Amp Draw
Speed
Power
Cord Length
Fan
Construction
Wheels
Specifications are subject to change without notice.
Some values may be approximate.
FOR PARTS AND SERVICE CALL YOUR LOCAL DISTRIBUTOR,
or the Dri-Eaz Service Department at 888-867-3235 or (360)
757-7776
3
F366
37 lbs (16.8 kg)
14.3" x 23" (36.3 x 58.4 cm)
7 amps
2 speed switch
805 W (1.0 HP)
25 ft. (7.62 m)
8 Blades
Thermaformed ABS Body
Rubber