Battery Check; Search Mode - ARVA NEO+ Guía De Utilización

DEVICE CARRYING
The holster must always be worn against your inner
layer of clothing (underwear or next to skin). The ARVA
should preferably be covered by a garment to prevent
cold and impacts.

BATTERY CHECK

Just after turning on your device, it will indicate the bat-
tery level. We recommend that you replace the batteries
as soon as they drop below 50%.
GROUP CHECK WITH FREQUENCY
CONTROL
After switching on your device, the NEO startup mode
offers a group check. To conduct a group check, press
the center button when ""CH"" appears on the screen.
Check your partners' beacons by positioning your device
0.5m to 1.5m from theirs.
- If the device being checked works properly, your bea-
con will display the distance between your device and the
device being checked and emit a standard search beep.
- If you are more than 1.6m from the device being
checked, your beacon will display the distance without
emitting a beep.
- If you are less than 0.5m from the device being
checked, your beacon will display the distance and emit
a double beep.
- If the device's frequency is too weak relative to the
standard, your transceiver will display an ""Er""/""02""
and emit a double beep.
- If the device's frequency is too strong relative to the
standard, your beacon will display an ""Er""/""03"" and
emit a double beep.
- If you are <0.5m from the device being checked, your
beacon will display an ""Er"" and emit an error beep.
Begin your check again, this time standing between 0.5m
and 1.5m from the other device.
- If you do not detect a signal, verify that your partner's
beacon is switched on. If it is, then have their device
inspected.

SEARCH MODE

SWITCHING TO SEARCH MODE
In avalanche situation, to switch in search
mode, open the holster and take off the device
which will stay attached by the elastic leash
and the black strap. To switch in search mode, push the
side button up.
EN