SICK Direct IN4000 Instrucciones De Servicio página 169

Operating instructions
IN4000 Direct
Fig. 5: Alignment
of the sensing face
on the safety
switch
8012183/WI13/2013-01-15
Subject to change without notice
Mounting
a
c
e
Mount safety switch with the aid of a mounting
bracket at the selected mounting location, if possible
so that it cannot be detached, and fasten in the
selected position. Tighten self-locking screws to
1.0 Nm.
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
b
d
f
GB
Chapter 4
169