Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
UNIVERSAL XSATHP - Technical Features
Microprocessor satellite managing the AVS Electronics peripherals directly connected on BUS RS
485. It also manages conventional detectors connected in the dedicated inputs on board.
The XSATHP satellite in its configuration for UNIVERSAL connection, visualizes remotely the status
of the peripherals connected on OC outputs in order to be universally compatible.
The system is completed by the PSTN dialer and/or optional GSM dialer (mod. XGSM) in order to
connect remotely via the management software HPWIN.
Standard input zones
Serial input zones
Alarm outputs
Telephone dialer
Control on supplying
Programming of detectors in
serial connection
Tension
Size
Working temperature
Max current with 3.4 A. supply
unit
Max current with 5.1 A supply
unit
Max current consumed on
13,8 V
Battery location
Products must be used according to their destination and in conformity to the norms applied to various
types of systems. Before using the installed products, it is necessary to carry out the test of the system
in order to check functionality as well as respect of the security norms according to what indicated by the
Law n. 46 dating 05/03/90 and norm CEI 79-3.
The device must not be subject to water sprinkle and no object containing liquid must be placed on it.
For the connection with anti-theft cables, with the exception of that for the Control Panel, the shield of each
cable must be only connected to the negative of Satellite.
•
n° 3 programmable with detection of alarm and tamper status
•
n° 1 input dedicated to indication of armed/disarmed system
•
n° 1 input dedicated to tamper, balanced and not excluded
• n° 16
•
n° 1 relay C/NC/NO at positive security of TAMPER satellite and detectors
Only connect circuits operating with SELV tensions to these outputs
•
n° 8 (max 16 with optional board mod. X0C8) transistorized outputs (50 mA
- Open Collector) on terminal board for connection with optional relay board
mod. MR4 / MR8
•
n° 1 output (50 mA - O.C.) on terminal board (FA) for good functioning of the
satellite
•
n° 1 output ( 50 mA - O.C.) on terminal board (TA) indicating TAMPER satellite
and detectors.
•
PSTN for remote management of peripherals
•
Optional GSM telephone dialer (mod. XGSM)
• With serial connection only, the keypad display will show the functioning
anomalies
•
From PC in direct connection via HPWIN software and USB cable
•
da PC in connessione telefonica con software HPWIN e modem universale
• Nominal stabilized tension of supplying: from 13,5 V
•
CONTXTREAM housing (LxHxD): 330 X 420 X 107 mm
•
CONTXTREAM-S housing (LxHxD): 321 x 279 x 83 mm
• +5 °C / + 40 °C
•
1.3A / 115 V ~
•
0.8A / 230 V ~
•
2A / 115 V ~
•
1.2A / 230 V ~
• Only satellite board 250 mA with PSTN dialer activated
•
Max 17 Ah with CONTXTREAM
•
Max 7 Ah with CONTXTREAM-S
- 23 -
E
N
G
to 14,5 V
Publicidad
Tabla de contenido
