Introduction; Applicable European Directives; Classifications; Marks Affixed On The Equipment - Mocom millrack Manual Del Operador

INTRODUCTION

Note, warning
and danger
symbols used
through the manual
APPLICABLE
EUROPEAN
DIRECTIVES

CLASSIFICATIONS

MARKS AFFIXED
ON THE
EQUIPMENT
Dear Customer
Thank you for choosing a product from M.O.COM. Srl. We hope that you will find it
completely satisfactory.
This manual describes all procedures for the correct installation and use of the
equipment.
Should you have any questions or suggestions concerning this product or our support,
do not hesitate to contact us.
P
AY SPECIAL ATTENTION
MAINTENANCE PROCEDURES AND USE METHODS
THIS SYMBOL INDICATES A POTENTIAL DANGER OF INJURY.
FOLLOW THE PROCEDURES DESCRIBED IN THE MANUAL TO
AVOID INJURING THE USER AND/OR OTHERS.
THIS SYMBOL SIGNALS A POSSIBLE DANGER FOR PEOPLE.
FOLLOW THE SUGGESTED PROCEDURE IN ORDER TO PREVENT
POSSIBLE DAMAGE TO USERS AND/OR OTHERS.
The product described in this manual is made according to the highest safety standards
and does not present any danger for the operator provided it is used according to the
instructions reported below.
The product complies with EN 60601-1 standards and with the directives 73/23/CEE
(and following updates).
The product complies with the following classification definition according to the
European directive EN 60601-1:
•
Equipment of class I;
•
Equipment of type B;
•
Degree of protection against liquid penetration IPX0;
•
Equipment not suitable for the use in presence of inflammable anesthetic
mixture with air or oxygen or nitrous oxide;
•
Equipment for continuous operation.
Equipment of type B
Warning, consult the relating documentation
~
Alternate current
NOTA
;
NOTES FOR PROPER INSTALLATION AND
.
WARNING
DANGER
1