808-012.book Seite 20 Freitag, 15. Dezember 2006 11:35 11
Fitting the automatic charger and putting it into service
The IU0U automatic charger is used as a power supply unit for the direct op-
eration of 12-V consumers. The maximum power consumption of the con-
sumers may not be exceed 8 A.
5.1
Device components
Item
in fig. 1, page 3
1
2
3
4
5
6
Fitting the automatic charger and
putting it into service
Caution!
The IU0U automatic charger must be installed in a place that is
protected from moisture and humidity.
Make sure:
– The installation location is well ventilated.
– The installation surface is flat and sufficiently firm.
The air intake on the underside and the air outlet on the back of the
IU0U automatic charger must be kept clear.
Caution!
Disconnect the mains plug before connecting or disconnecting the
DC voltage connection.
20
All manuals and user guides at all-guides.com
Meaning
Fuse insert with glass fuse 10 A/250 V
"Power" indicator lamp
"Charging" indicator lamp
Connection terminal
Mains power cable (230 V)
PerfectCharge IU812