Publicidad
Idiomas disponibles
Idiomas disponibles
5.4 Deleting the Baby Unit (Camera)
• Press the MENU/Exit key (12) and the menu screen will be displayed on the Parent Unit.
• Press the LEFT key (10) or RIGHT key (8) until the camera icon is highlighted in red then press UP key
(5) or DOWN key (9) to select the desired camera to delete. It will start blinking.
• Then at the back of the Baby Unit, press and hold the "PAIR" button until the connection is established.
• The above procedure will automatically remove the Baby Unit you want to delete. The Baby Unit you
want to keep will overwrite the position of the Baby Unit you deleted.
• Press the EXIT button (12) to exit the menu.
5.5 ECO Setting
This mode allows you to control the sound level from your baby's room to automatically activate the
sound and video transmission on your Parent Unit. When using the ECO function,
the sound and video transmission will stop (standby mode) if the Baby Unit does not
register any sound within 30 seconds. While in standby mode, the LCD screen turns off.
Once the Baby Unit registers a sound, louder than the set sensitivity level,
it will automatically start transmitting the signal (sound and video) to the Parent Unit
and the LCD screen will turn on.
Note: ECO default setting is OFF in the supplied product.
To change the ECO level, please follow the following instructions:
• Press the MENU/Exit key (12) and the menu will be displayed on the Parent Unit.
• Press the LEFT key (10) or RIGHT key (8) until the ECO icon is highlighted in red. Press UP key (5) or
Down key (9) to select the desired level (HIGH, MID, LOW, OFF).
• Press OK to confirm.
• Press the MENU/Exit key to Exit (12).
Note: ECO-LOW Low sensitivity level - higher sound level is required to reactivate the transmission
ECO-MID Medium sensitivity level - medium sound level is required to reactivate the transmission
ECO-HIGH High sensitivity level - low sound level is required to reactivate the transmission
OFF Constant transmission – no standby mode.
Note: When ECO function is on, a ECO indicator will be displayed on top of the LCD screen.
Note: To view a video signal on your parent unit when ECO function is on, briefly press the power key.
5.6 Audio Only Mode - (Video OFF - Audio ON)
• Briefly press the Power key (1) to turn the LCD screen ON or OFF.
This mode will turn the video transmission off but still allow you to hear sounds from the camera.
Press the power key again to resume the video transmission.
5.7 Talk To Baby
• Press and hold the talk key (7) on the Parent Unit to talk to your baby or partner in the baby's room
via Baby Unit.
• A microphone icon will be displayed on the bottom of the LCD screen while this function is in use.
• Release the button when you are finished talking.
Note: While the "Talk To Baby" function is in use, there is no possibility to hear the sounds
from the Baby Unit. Releasing the talk key, allows hearing the sounds from the baby's room again.
5.8 Digital zoom & Image Pan / Tilt
• Press and hold Menu/Exit key (12) for approx. 2 seconds to operate Zoom in/out.
• At the Zoom mode, press the LEFT key (10) RIGHT key (8) UP key (5) DOWN key (9)
to Pan/Tilt the image.
• During Digital Zoom mode, the zoom icon will be displayed on top of the LCD screen.
Note: To adjust Volume/Brightness, first exit the Zoom mode before operating it.
EN
5
Publicidad
