Aquavitro element Ca Manual De Instrucciones página 10

Assembly
Figure 2
After checking the integrity of each component, assemble the unit using the diagram. (Figure 2)
1. Start by removing the Locking Rings (B1
and B2) from the Support Base (A).
2. Place the main Reactor Column (E) with
its internal components having been pre-
packaged with it, on the Support Base (A).
10
™
The versatility of the element
Tubing (T1 and T2). Go to www.aquavitro.com for more information.
3.
4.
Ca allows for two additional options in setting up
Apply the Locking Ring (B1) around the
connection point of the Reactor Column (E)
to the Support Base (A).
Apply the Locking Ring (B2) around the
Reactor Column (E) and the Reactor
Column Cap (H).