Navigation Settings - Porsche Classic Manual Del Aparato

Calibrating the display
If the touchscreen function is inaccurate it needs
to be recalibrated.
1. Tap button SET.
2. Select menu option General settings.
3. Select menu option Display calibration.
4. Tap the indicated points as centrally as pos-
sible and in sequence 1 to 5. The calibration
programme stops automatically when the
procedure has been successful.
This procedure may have to be repeated
until the program automatically stops. This
indicates that the procedure has been suc-
cessful.
14
How to use your PCRN
Changing the key color
1. Tap button SET.
2. Select menu option General settings.
3. Select menu item Key color and select
either
- Green,
- or -
- White,
- or -
- Amber.
The new setting is applied immediately.
Restoring factory reset
Select menu option Factory reset if you wish to
reset the device to the factory settings.
1. Tap button SET.
2. Select menu option General settings.
3. Select menu option Factory reset.
Please note that this will delete all settings,
including e.g. any stored stations. After the
option is selected, a prompt is displayed.
Confirm it if you wish to restore the factory
settings.

Navigation settings

Zooming the map using the right-hand knob
Zoom in/out enables the zoom function in the
map display of the navigation software by turning
the right-hand knob .
1. Tap button SET.
2. Select menu option Navigation settings.
3. Enable option field Zoom in/out.
Skip with the right-hand knob
Skip track enables the Skip track function
(next/previous track and change of frequency) by
turning the right-hand knob
1. Tap button SET.
2. Select menu option Navigation settings.
3. Enable option field Skip track.
When navigation is running in the foreground:

When Zoom in/out is enabled, tracks played
back in media mode can only be skipped using
the touchscreen and by turning the right-hand
knob .
For further navigation settings please refer to

the separate navigation manual.
.