Kalorik MGR 38593 Manual Del Usaurio página 10

Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International USA. The
page must be reproduced and folded in order to obtain a booklet
A5 (+/- 148.5 mm width x 210 mm height). The page must be folded
in order to keep the good numbering when you turn the page of the
I/B. Don't change the page numbering. Keep the language integrity.
Print only what is inside the frame.
IN CASE THE MOTOR IS BLOCKED OR CANNOT BE
SWITCHED ON
In the event that the motor slows down or stops, it is possible that
meat is blocking the grinder. In this case, immediately stop the
appliance and use the reverse (REV) switch. To do so, first switch off
the meat grinder (0 position), then press the reverse switch, 3
consecutive times. The feed screw will start rotating in the other
direction; the meat will move in the other direction as well,
sometimes back up into the feeding tube and release the clog. To
stop the reverse function, simply release the reverse switch. You can
now press the on/off switch again and resume normal operation.
Should the motor still be blocked, unplug the appliance and
disassemble its attachments. Be very careful when handling the
blade, as it is very sharp.
IMPORTANT! If the motor overheats after a long usage or because of
a motor jam, it will switch off automatically and the control switches
will become unresponsive. If this happens, let the motor cool down
completely, for 30 minutes at least. Then press on the "RESET" button
underneath the appliance to reset the safety circuit breaker that
protects your appliance. This will enable normal operation again.
10
Assembly page 10/48
MGR 38593 - 141121