Clean The Filter Canister - Polaris ROBOTIC Alpha iQ+ Manual Del Propietário

Figure 16. Keep Cleaner Vertical to Drain Water
3. Unplug power to the cleaner at the control
box (Figure 17).
Figure 17. Unplug
4. Remove the cleaner from the pool and
untangle all kinks and coils in the power
cable (Figure 18). Start at the cleaner
head. Lay the cable in the sun to loosen
any tangling memory.
Figure 18. Untangle

Clean the Filter Canister

The filter canister should be cleaned at the end of
each cycle.
1. Remove the cleaner from the water using
the Lift System and let the remaining water
drain.
2. Set the unit on four wheels.
3. Push the cover lock (1) and lift the cover
(2) until it is secured in the vertical position.
(Figure 19).
1
2
Figure 19. Lift Cleaner Cover
Page 17