Setting The Time And Day; Setting The Clock; Setting The Fan; Selecting System Mode - Honeywell Home Smart Serie Guia Del Usuario

Setting the time and day

Set Clock/Day/Schedule, then press
1 Press
to set clock.
t
Set Day, then press
2 Press
the day of week.
Done
3 Press to save.
Note: If the Set Clock/Day/Schedule option is not
displayed, press Done.
Note: If the display flashes Set Clock, the
thermostat will follow your settings for the
Monday "Wake" time period until you reset the
time and day.

Setting the fan

Press Fan to select On or Auto (toggle to
re-select).
Auto : Fan runs only when the heating or
cooling system is on. Auto is the most
commonly used setting.
On: Fan is always on.
Note: Options may vary depending on your
heating/cooling equipment.

Selecting system mode

Press System to select:
Heat: Controls only the heating system.
Cool: Controls only the cooling system.
Off: Heating/cooling systems are off.
Auto : Selects heating or cooling depending
on the indoor temperature.
Em Heat (heat pumps with aux. heat):
Controls auxiliary/emergency heat.
Compressor is off.
69-2715EF—07
or
s
or to select
s t
14
Note: Depending on how your
thermostat was installed,
you may not see all system
settings.
HOLD
HOLD
MCR33855
MCR33895
MCR33880