Defects - Malfunctions - Faema SMART/A Uso E Instalacion

17. Defects – Malfunctions
Direct action by the customer
Before calling service personnel, to avoid unnecessary expense, check whether the machine problem corresponds to
one of the cases listed below.
PROBLEM
The coffee machine is not
working.
The coffee machine is not
heating up.
rim (10).
Coffee dispensing time too
short.
Coffee drips out of machine.
Loss of water under the
machine.
Machine heated up, but it does
not dispense coffee.
CAUSE
No electricity supply.
ON/OFF switch (1) position incorrect.
Underpan gasket dirty with coffee.
Coffee ground too coarse.
Coffee too old.
Filter holes blocked or filter holder (10)
outlet hole dirty.
Discharge well clogged up.
Discharge pan hole blocked.
Water supply or water softener tap closed.
No water in system.
16 EN
SOLUTION
Check the electricity supply.
Check the position of the ON/OFF
switch (1).
Turn the ON/OFF switch (1) to
position 2.
Clean using the special brush
provided.
Use new coffee.
Clean.
Use a coarser grind.
Clean.
Clean.
Open.
Wait until water is available or call a
plumber.