Sleep Timer; Picture Adjustment - Sylvania CT202SL8 Instrucciones

W
ATCHING TV

Sleep Timer

The sleep timer can be set to automatically turn off the unit after an
incremental period of time.
1
Press [PICTURE/SLEEP] once.
• Sleep timer display appears on the TV screen.
2
Use [Cursor { / B] to change the amount of time until
turn off the unit.
or
• You can set the unit to turn off after a set period of
time (from 30 to 120 minutes).
• Each time you press [Cursor { / B], the amount of
time will increase or decrease by 30 minutes.
• After set up, the sleep timer display can be called up
for checking by pressing [PICTURE/SLEEP].
To Cancel the sleep timer
Use [Cursor { / B] at step 2 until "OFF" is displayed on
the TV screen.
Note:
• The sleep timer setting display will automatically disappear
in a few seconds.
• When you disconnect the unit from the AC outlet or when a
power failure occurs, the sleep timer setting will be canceled.
18
EN
SLEEP OFF
SLEEP 90MIN.

Picture Adjustment

You can adjust brightness, contrast, color, tint and sharpness.
1
Press [PICTURE/SLEEP] repeatedly until the desired
picture menu appears.
2
Use [Cursor { / B] to adjust the quality.
or
[Cursor {]
BRIGHT to decrease brightness to increase brightness
CONTRAST to decrease contrast
COLOR to decrease color
TINT to add red
SHARPNESS to make soft
Note:
• The picture adjustment setting display will automatically
disappear in a few seconds.
SLEEP
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
[Cursor B]
to increase contrast
to brighten color
to add green
to make clear