Index Search; Basic Recording & Otr - Sylvania CT202SL8 Instrucciones

Index Search

This function allows you to index the starting point to make it easy to reach
the point in either fast forward or rewind mode.
• Every time you start recording, an index is marked
automatically. The index mark also works as the
starting point of timer recording.
• The index mark will not be recorded if [PAUSE F] is
used during recording.
• The time gap between making the index marks on
the cassette tape should be greater than 1 minute for
SP recording, 2 minutes for LP recording and
3 minutes for SLP recording.
• In some cases, the index mark at the beginning of
cassette tape cannot be detected.
Example: You are watching program number 4 and want
to fast forward to program number 7. Skip 3 programs.
current playback program
beginning of
the contents
pro.1 pro.2 pro.3 pro.4 pro.5 pro.6 pro.7
4 3 2
index mark
1
Press [SET-UP] to display the main menu.
2
Use [Cursor K / L ] to select "INDEX SEARCH", then
press [ENTER].
or
3
Use [Cursor K / L ] to until the number of programs
that you want to skip appears.
or
4
Use [Cursor s / B] to let the unit rewind or fast
forward to the beginning of desired program.
or
5
When the search is completed, the unit will start
playback automatically.
Note:
• The numbers of index search can be set up to 20.
• This function is not available during recording.
• To cancel index search in progress, press [STOP/EJECT C A]
on the unit or [STOP C] on the remote control.
end of
the contents
1 1 2 3
e.g.) digital TV mode
– TV/VCR SETUP –
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SETUP
USER'S SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
B INDEX SEARCH
DTV SETUP
INDEX SEARCH
03
Basic Recording & OTR
This function describes how to record to this unit from the programs.
One-touch timer recording (OTR) enables you to start recording for specifi ed
length simply by pressing [REC/OTR . , I ] on the unit.
Before you begin:
Insert a cassette tape with its erase-prevention tab in place.
Make sure the cassette tape has enough remaining tape for the recording.
1
Use [CH. K / L ] or [the Number buttons] to select the
channel to be recorded.
or
2
Press [SPEED] to select the desired tape speed (SP/ SLP).
(Refer to "Selecting Tape Speeds" on page 24.)
3
Press [REC] to start recording.
4
Press [REC/OTR I] on the unit repeatedly until your
desired length appears on the TV screen. The recording
time will increase by 30 minutes up to 8 hours. Recording
starts immediately when you press [REC/OTR I].
Time(s) Display Recording Length
Once REC basic recording
Twice OTR (0:30) 30 minutes
3 times OTR (1:00) 60 minutes
17 times OTR (8:00) 480 minutes
18 times REC return to the basic recording
5
Press [STOP C] to stop recording.
Note:
• If the recording is paused for more than 5 minutes, the unit will
restart the recording to prevent cassette tape from damage.
• This unit cannot record the contents from the built-in DVD.
• You can only watch the same TV program that is being recorded.
• Even if you press [POWERy y ] during OTR, the unit continues
recording.
• You cannot start OTR with the remote control.
• In the SLP mode, maximum recording time, assuming the
cassette tape starts at the beginning, is 8 hours using T-160
(or 6 hours using T-120).
• If the cassette tape runs out before the end time, the unit will
switch to the stop mode immediately, eject the cassette tape
and turn itself off.
• To show the remaining time of OTR, press [DISPLAY] on
the remote control to display "OTR" on the TV screen. (It will
show up momentarily then disappear.)
CH 25
SP
REC
OTR (2:30)
EN
27