Sleep Timer - Dimplex DFR2551L El Manual Del Propietario

Operation
and enable the heater.
! NOTE: When the heater has
been disabled and either the
or the
Screen Display will indicate "--".
F. Color Themes
Different presets of ambient light-
ing color combinations contained
in the unit.
→ Changed by repeatedly press-
ing the corresponding button
on the remote
• Cycles through the different
preset ambient lighting settings
of the unit, this includes differ-
ent combinations of colours of
the flame and media lighting (if
applicable).
! NOTE: The last theme (media
versions) or the second to last
theme (logset versions) of the
cycle is a prism where the unit cy-
cles through a variety of colours.
Pressing the
cycling and holds the unit on the
preferred color, indicated by a
solid circle. When the unit is on
prism, and is cycling through the
colours, a rotating circle will be
displayed.
is pressed the On
or the unit.
button stops the
G. Brightness
Changes the brightness of the
lights in the unit.
→ Adjusted by repeatedly press-
ing the corresponding button
on the remote.
• Indicated by the second
digit on the Floating Display™
changing to show: "H" (high),
and "L" (low).
H.

Sleep Timer

The Sleep Timer can be set to
automatically shut off the fireplace
after a preset time (from 30 min-
utes to 8 hours).
→ To set the timer press the timer
button on either the remote or
the unit, repeatedly, until the
desired time is displayed.
• The On Screen Display will
display the different times as it
is adjusted. Once the timer has
begun, pressing the
will display the time remaining
before the unit turns Off.
! NOTE: The Sleep Timer can
be cancelled at any time by
pressing the
edly until the sleep timer displays
nothing.
button
button repeat-
11