Fireplace Installation; Front Glass Installation - Dimplex DFR2551L El Manual Del Propietario

Fireplace Installation

WARNING: Ensure the power
cord is not installed so that it is
pinched or against a sharp edge
and ensure that the power cord is
stored or secured to avoid tripping
or snagging to reduce the risk of
fire, electric shock or injury to per-
sons.
WARNING: Construction and
electrical outlet wiring must comply
with local building codes and other
applicable regulations to reduce the
risk of fire, electric shock and injury
to persons.
WARNING: Do not attempt
to wire your own new outlets or
circuits. To reduce the risk of fire,
electric shock or injury to persons,
always use a licensed electrician.
WARNING: To reduce the risk
of fire, do not store or use gaso-
line or other flammable vapors or
liquids in the vicinity of the heater.

Front Glass Installation

1. Unpack the glass assembly.
2. If applicable, carefully pour and
evenly distribute the supplied
media in the Media tray of the
firebox. (Figure 2)
3. Hang bottom bracket on screw
at the bottom of the firebox.
(Figure 1)
6
Figure 1
4. Secure the top bracket to fire-
box using screws provided in
the hardware bag. (Figure 1)
Dimplex Mantel Installation
Depending on the available space
within the mantel cavity, the unit
can be secured to the mantel at the
bottom side or back. Remove the
screw on the bottom flange in the
most appropriate place for securing
and using the provided L-bracket
and the screw that was removed
attach the firebox to the mantel.
(Figure 3)
! NOTE: There are no guide
holes provided for the L-Brackets in
the mantel.
www.dimplex.com