EmberGlow VFF15NLA Manual De Instalación Y Funcionamiento Del Propietario página 13

3. Attach gas line to fireplace gas regulator.
See Connecting to Gas Supply, page 13.
4. Check all gas connections for leaks. See
Checking Gas Connections, page 15.
IMPORTANT: When finishing your firebox,
combustible materials such as wall board,
gypsum board, sheet rock, drywall, plywood,
etc, must have 1/2" clearance to the sides
and top of the firebox. Combustible materials
should never overlap the firebox front facing.
If using a cabinet mantel, assemble following the instructions included with
the mantel at this time.
Note: Some mantels are designed with physical and chemical distress to
enhance the realistic appearance of the wood.
1. Carefully push the fireplace insert into
the mantel from the front as shown in
Figure 11.
2. Position the fireplace against the wall in
the desired location.
200176-01B
INSTALLATION
Figure 10 - Rough Opening for Corner
CABINET MANTEL
Figure 11 - Installing Fireplace Insert Into
www.sureheat.com
90°
15 / "
5
8
36 / "
1
2
Installation
PCS150-1-TA Mantel
13