Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
7.2 CONFIGURATION OF THE LIMITS OF WEIGHT ( SUPERIOR AND INGERIOR) |
1. Press the key
2. The display will show the message " 000.00L" ( inferior limit)
3. Use the keys
4. Press the key
5. The display will show the message "000.00h" (Superior limit=
6. Use the keys
Note: You can can stay over the last digit to modify if you wish.
7. Press the Key
8. El display shows the value.
DISPLAY
VALUE
A
0
1
B
0
C
0
1
2
9. Press the keys
10. Press the key
7.3 AUTO SWITCH OFF |
MODES:
AoFF 00
– Auto switch off deactivated
•
AoFF 01
– Auto switch off activated in a minute. The scale is going to switch off automatically after 1 minute of not being used.
•
You can configure the value wished from 1 to 99 minutes.
•
1. Press the key
2. Press the keys
3. Press the key
7.4 DISPLAY BACKLIGHTING |
MODES:
A:
Automatic.
•
ON
: Illumination Activated.
•
OFF
: Illumination Deactivated
•
1. Press the key
2. Press the key
3. Press the key
32
to access the parameter.
and
to move the cursor and the key
to confirm.
and
to move the cursor and press the key
to confirm.
(configuration of the alarm)
ESTABILITY
There is no need to stabilize the alarm to make it ring
The alarm must be stabilized to ring
Always 0
Alarm switched off
The alarm ring if it is place on the band OK
( between the limits Lo and Hi)
The alarm rings if it is situated below the
inferior limit Lo or above the superior limit
Hi
and
to move the cursor and the key
to confirm.
UF-3
to have an access to the parameter.
and
to move the cursor and the key
to confirm.
UF-4
to have an access to the parameter.
to select the desired mode.
to confirm.
to choose the desired number.
Hi
)
to choose the desired number.
A
B
C
0 0 0
LO
OK
LO
OK
to choose the desired number.
to choose the desired number.
USER'S MANUAL ABD
UF-2
HI
HI
EN
Publicidad
Tabla de contenido
