Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CALIBRATION OF THE WEIGHT
DISPLAY
LF 1
maximum capacity and it must also never be exceeded.
CAL Z
•Press the key
to the menu LF1)
150.00 kg
•Use
bration will be done. ( press the key
150.00 kg
•Place the required weight on the scale as it is indicated in the display.
150.00 kg
•Once everything is steady, press the key
tion and go back to the menu LF1).
THE CALIBRATION IS GOING TO FINISH AND THE SCALE WILL GO VACK TO THE WEIGHING MODE AUTOMATICALLY.
CONFIGURATION
LF 2
DISPLAY
FIRST STEP
262144
•DISPLAY OF THE INTERNAL COUNTING
•POSSIBLE VALUES OF THE PARAMETERS
SECOND STEP
A: Metric system
B: American system
C: other unities
1 0 0 0 0 1
D: PCS
A B C D E F
E: double range
F: units of calibration
lb oz cannot be selected as unities of calibration.
THIRD STEP
•Use
000000kg
FOURTH STEP
•Use the Keys
dP 0.0
LF 1
DESCRIPCIÓN y SECUENCIA DE USO
The calibration can be done with any weight, but the weight ca not be inferior to 1/100 of the
to start the calibration of zero ( press
0 ~ 9
,
and
,
DESCRIPTION AND SEQUENCE OF USE
0:NO
0:NO
0:NO
0:OFF
0:OFF
The scale won't let us continue up to the next step if there is a mistake during the programming.
0 ~ 9
,
and
,
,
to change the position of the DECIMAL POINT.
d 0.00
d 0.000
to exit the calibration and go back
and then
pto introduce the weight with which the cali-
to exit the calibration and go back to the menu LF1)
to calibrate it ( press the key ESC to exit the calibra-
1: kg
2:T
1: lb
2:lb oz
1: TW kg
2:HK kg
1: ON
1: multi interval
2:multi range
1:use metric
2:use american unities
unities
and then press
to introduce THE MAXIMUM CAPACITY.
d 0.0000
USER'S MANUAL ABD
3:g
3:VISS
0.00000
EN
37
Publicidad
Tabla de contenido
