Flush Install Dimensions; Standard Installation - Thermador TCMTK30RS Manual Del Usaurio

Flush Install Dimensions

inches (mm)
Top View
¾
" (19)
reveal
cleats
1"
(25)
½
28
30" (762)
reveal cleats
19 19 19 ⅞ ⅞ ⅞ " – 23 " – 23 " – 23
(504 – 597) (504 – 597) (504 – 597)
*
Side View
NOTE: * Flush installation requires a 5/16'' (8 mm) high x
½
28 '' (724 mm) wide x 22
underneath the unit body.

Standard Installation

1. Install the Left Cabinet Mounting Bracket at the top
left of the cabinet opening using two (2) ¾'' Phillips
head wood screws. Ensure the bracket is flush to the
cabinet side and cabinet face.
1
2
½ ½ ½
19 19 19 ⅞ ⅞ ⅞ " – 23 " – 23 " – 23
(504 – 597) (504 – 597) (504 – 597)
flush inset
¾
" (19)
depth
reveal
cleats
" (724)
1" (25)
20 ⅛ "
(511)
½ ½ ½
" " "
flush
cut-out
height
½
'' (571 mm) deep baseplate
dia. 1/16"
2. Install the Right Cabinet Mounting Bracket at the top
right of the cabinet opening using two (2) ¾'' Phillips
head wood screws. Ensure the bracket is flush to the
cabinet side and cabinet face.
" " "
3. Measure 1
mark on both sides of cabinet.
4. Install the Left and Right Side Cabinet Brackets flush
to the cabinet face with two (2) ¾'' Phillips head wood
screws per side. Install side trim mounting bracket so
that the bottom edge of the bracket is aligned with
mark.
1
dia. 1/16"
2
⅝
'' (41 mm) from cabinet base and make
⅝ ⅝ ⅝
1 1 1 " (41) " (41) " (41)
dia. 1/16"
2
1
Page. 4