Slingshot™ Rtk Corrections; Wi-Fi Field Hub Models; Operating Conditions - Slingshot Field Hub Manual De Instalación

Ethernet LED Status
The LED's next to the Ethernet plug on the back of the
Field Hub™ will display as follows:
• Link - The Link LED is illuminated when a link is
established with an ethernet device (i.e. Raven field
computer).
• Activity (Act) - The Activity LED flashes when data is
being transmitted/received by the ethernet device.
Slingshot™ RTK Corrections
The Field Hub comes preconfigured to receive RTK corrections via a cellular
data connection. Contact your local Slingshot dealer for availability and
subscription information.
To begin utilizing RTK corrections from the Field Hub:
1. Connect your GPS receiver to the RS-232 port on the Field Hub using the
appropriate Raven serial cable.
Warning: Use only Raven approved serial cables designed specifically
for your GPS receiver or data overages may result. Contact
your local Slingshot™ dealer for appropriate cable part
number and ordering information.
2. Set the receiver baud rate to 115200.
3. Set the receiver to accept RTK corrections.
Note: Depending on your receiver, this may require an unlock code. Contact
your receiver dealer or manufacturer for more information.

Wi-Fi Field Hub Models

Personal mobile devices may be used to connect to the internet via the Wi-Fi
Field Hub. Search for the Field Hub's SSID# (printed on the top) on the mobile
device being connected. The Wi-Fi password is also located on top of the
Field Hub.

Operating Conditions

Store and operate the Field Hub according to the following conditions:
• Operating Temperatures: -40° to 185° [-40° to +85° C]
• Humidity: 95% (non-condensing)
• Shock: MIL-STD-810F
• Vibration: MIL-STD-810F
• Automotive: SAE J1455
If conditions are expected to exceed these specifications, remove the Field
Hub from the vehicle and store in a dry, temperature controlled environment.
5