10
5
9b
8b
7
8a
1
3
2
4
3
6
4
Camera/Pushrod reel
1 Pushrod Reel: Holds the pushrod on a revolving reel. The pushrod is up
to 150m (500ft) in length.
2 Rod Guide: Guides the rod on and off the reel.
3 Stowage Hooks: To store the link cable on the reel.
4 Cable Socket: Connector for the link cable.
5 Link Cable: To connect the reel to the controller.
6 Skids: Protect the camera during use and centers the camera in the pipe.
Refer to the operation manual for skid and brush installation.
7 Universal Flexi: Attaches to the end of the pushrod to allow the camera
to negotiate small radius bends.
8 Sonde (8a), flexisondes (8b) and non-detachable Plumbers sonde (8c)
(P341 Plumbers reel only): transmit a signal to allow the position
of the camera to be pinpointed using an RD7000
(optional purchase).
9 Camera: Two color camera options are available:
a. 50mm (2") diameter camera with manually adjustable focus for up to
230mm (9") diameter pipes.
b. 25mm (1") diameter camera with manually adjustable focus for up to
100mm (4") diameter pipes.
10 Brake: Can be adjusted to control the reel movement or to lock the reel.
Mains adapter (not shown): Connects the controller to mains power.
Vehicle power lead (not shown): Connects the controller to your vehicle
power socket (12-24V).
Battery pack (not shown): Optional battery pack to allow the use of the
system where mains power is not available.
Controller Clamp (not shown): Allows the controller to be mounted
onto the reel (controller clamp optional on the P341 models).
Environmental specifications
9a
• Storage Temperature:
• Operating Temperature: 14 to 122°F / -10 to 50°C
• IP Rating:
Controller:
Mains adapter: IP67 rated for outdoor use
Cameras:
8c
™
DL+ receiver
-4 to 176°F / -20 to 80°C
IP55 (covers closed)
IP53 (covers open and socket panel closed)
IP68 to 330' (100m) /11bar
5