Important Safety Instructions - Okoru Global SmartSun Manual De Instrucciones

1.
INSTRUCTION MANUAL FOR SOLAR AND WIND
SENSOR MY SUN
FOR YOUR OWN SAFETY AND THAT OF OTHERS, IT IS IMPORTANT
TO FOLLOW THE INSTRUCTIONS BELOW AND PAY SPECIAL
ATTENTION TO THE WARNINGS.
WARNING: Important Safety Instructions
It is important for people's safety to follow these instructions. Keep this user manual for future
reference.
• This product is not intended for use by persons (including children) with reduced physical,
sensory or mental abilities, or lack of experience or knowledge, unless there has been
supervision or instruction regarding the use of the product by a person responsible for your
safety.
• Do not allow children to play with the fixed controls. Keep the remote controls out of the reach
of children.
• Examine the installation frequently and check for signs of cable imbalance, wear, or damage.
Do not use the installation if it requires repair.
• Take special care when opening or closing the awning, as it may cause a sudden fall due to a
broken mechanism.
• Read and follow these instructions correctly. Incorrect installation can injure people. All
responsibility is disclaimed in the event of damage related to incorrect use or failure to comply
with the instructions.
• Before installing the sensor or carrying out any operation with the electric current, make sure
that the current is cut off.
• Before connecting the sensor to a power source, check that the voltage of that power source
and the nominal voltage correspond to those specified in the technical data.
• Never place the wind sensor in places exposed to high temperatures such as walls near ovens
(minimum -33º to 40º).
• This product includes the symbol for the classification and separate collection of Waste
Electrical and Electronic Equipment (WEEE). This means that during the processing and
dismantling of such a product, the requirements of the European Directive 2012/19 / EU must
be met to reduce the negative impact it may have on the environment.
12