Sensor Installation - Okoru Global SmartSun Manual De Instrucciones

3.

SENSOR INSTALLATION

3.1 CIRCUIT INSTALLATION
The sensor must be installed and connected to the electrical current through a cable (not included in the
sensor) by removing one of the side covers from the sensor base.
The electrical connection must be made as the diagram:
3.2 SENSOR INSTALLATION
The sensor should be installed in a location that can measure the actual wind reaching the awning.
It must be placed in a place as protected from the rain as possible and maintaining the necessary
distance so that the awning can be opened without causing damage.
14
Blue - Neutral
Brown - Phase