oklahoma joes Rider 600 Manual De Usuario página 32

Error Error Icon
Code Title
Control No Icon
ER0
Knob Posi-
tion Error
Auger Error
ER1
Ignitor Error
ER2
Combustion
ER3
Fan Error
Temperature No Icon
ER4
Probe Error
E RROR CODES
Cause
Power turned on while the
knob is not in the OFF/Shut-
down position
• The Pit Control system
cannot detect the auger
motor
• An auger motor malfunc-
tion.
• The Pit Control system
cannot detect the ignitor
• An ignitor malfunction
• The Pit Control system
cannot detect the fan
• A fan motor malfunction
• The Pit Control system
cannot detect the tem-
perature probe
• The Pit Control system
detects abnormal signal
from the temperature
probe
• A temperature probe
malfunction
Solution
1. Turn the power off
2. Turn the knob to the OFF/Shutdown position
3. Turn the power on
1. Unplug the grill from the power.
2. Remove the Pit Control panel and ensure all wires are not damaged and
are firmly connected.
3. Reassemble and retry.
If the error persists, please call Oklahoma Joe's customer service for assis-
tance.
1. Unplug the grill from the power.
2. Remove the Pit Control panel and ensure all wires are not damaged and
are firmly connected.
3. Reassemble and retry.
If the error persists, please call Oklahoma Joe's customer service for assis-
tance.
1. Unplug the grill from the power.
2. Remove the Pit Control panel and ensure all wires are not damaged and
are firmly connected.
3. Reassemble and retry.
If the error persists, please call Oklahoma Joe's customer service for assis-
tance.
1. Unplug the grill from the power.
2. Remove the Pit Control panel and ensure all wires are not damaged and
are firmly connected.
3. Reassemble and retry.
If the error persists, please call Oklahoma Joe's customer service for assis-
tance.
35
OK LAHO M AJ O ES. CO M
42805490 • 12/06/19