Installation; Location; Transport And Storage - Domus PM-1018 Manual De Uso Y Mantenimiento

3. INSTALLATION

Install the machine according to current regulations
3.1.

Location

3.1.1. Transport and storage

The machine must always be transported on its pallet and original packaging to guarantee its integrity.
Transport the machine to the definitive work place.
Remove the packaging and make sure that it has not been damaged during transport.
In no event install or keep the ironing press outdoors.
If the machine has to be stored for a long time, cover it with its original packaging to protect it from
external agents and keep it in the optimum environmental conditions. It should also be disconnected
from the electricity network.

3.1.2. Location

Install the machine in a big room to obtain efficient work conditions and to guarantee the sufficient ease
of movement of the workers using the machine.
The definitive position of the machine must allow its correct use. The distances indicated on the following
drawing must be observed to allow correct maintenance by the authorised staff.
Once located in its definitive work place, remove the pallet to which the ironing press is attached at the
back of the base with 2 bolts at the base of each cabinet. Keep the pallet with the original packaging for
possible future movements. Do not push the machine or clear obstacles without the pallet, the machine
may be damaged resulting in malfunctioning.
1
-LOCATION OF BOLTS 1 AND 2
2
-UNSCREW WITH A FLAT SPANNER NO. 13
21