Installation Prepare; Installation Drawing; Selection Of Location - HTW IX90S-R32C Manual De Usuario E Instalacion

Installation prepare

Installation drawing

Tools
1 Level meter
4 Drill head
7 Open-end wrench
10 Vacuum pump
13 Inner hexagon spanner

Selection of location

Basic requirement
Installing the unit in the following places maycause malfunction. If it is unavoidable, please
consult the local dealer:
1. The place with strong heat sources, vapors, flammable or explosive gas, or volatile
objects spread in the air.
2. The place with high-frequency devices (such as welding machine,medical equipment).
3. The place near coast area.
4. The place with oil or fumes in the air.
5. The place with sulfureted gas.
6. Other places with special circumstances.
7. The appliance shall not be installed in the laundry.
2 Screw driver
5 Pipe expander
8 Pipe cutter
11 Pressure meter
38
Drainage pipe
3 Impact drill
6 Torque wrench
9 Leakage detector
12 Universal meter
14 Measuring tape