Descargar Imprimir esta página

Maintenance And Storage - SOLL Xenon Manual Del Usaurio

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 22
Xenon lifeline
GB
Carriage user manual
You have just purchased a
XENON anchorage device
and we thank you for your trust. To
be sure this product is to your full
satisfaction, for each use, please
follow the instructions given in the
manual.
CHARACTERISTICS OF THE
XENON LIFELINE
The length between two structural
anchors is included between 2m
and 12 m. The Xenon lifeline can
be used simultaneously by a
maximum of 4 people. Because all
the installations are different, refer
to
the
indications
of
identification plate attached near
the lifeline to see how many users
can employ it simultaneously, and
establish the minimum clearance
for each installation.
Check the
compatibility of the fall arrest
system
with
the
minimum
clearance. The Xenon lifeline is in
conformity with EN 795 Class C.
The line intermediate structural
anchors are designed to tolerate
15 kN force, and the terminal
structural anchors to tolerate 19
kN force for an 8 mm diameter
cable and 24 kN for a 10 mm
diameter cable. Depending on the
type of support (concrete, metal
structure or other), it will be
necessary to validate with the
owner or an approved organization
the
installation
to
ensure
matches
the
given
forces.
Preferably, the lifeline should
3
be placed above the position of the
user.
User instructions
Before each use, check the lifeline
for general condition and in
particular, make sure that the pre-
tension indicator (green) is clearly
visible and that the fall indicator
has not been activated (yellow
indicator visible). If there is any
doubt about its condition, have the
Xenon lifeline checked by a
competent person and replace any
parts considered to be defective.
Any fall or mechanical overload
triggering the fall indicator of the
absorber
means
installation must be checked and
the
any
part
affected,
absorber, must be replaced.
The Xenon lifeline carriage is
designed for use in combination
with other individual fall arrest
systems in conformity with EN 363
(e.g.
energy
absorber
conformity with EN 355 + harness
conforming to EN 361). Therefore,
any person working near a drop
must take all necessary steps to
keep the connecting part to the
lifeline as short as possible so as
to minimize the height of free fall,
in accordance with the minimum
clearance needed.
The Xenon carriage is a device
forming part of the personal
it
protection equipment and must
therefore not be left permanently
on the installation.
performance of the carriage before
each use, in particular with regard
to its locking on the cable.
WARNING
Failure
to
comply
instructions in this manual could
have serious repercussions. We
advise
you
instructions periodically.
should be kept with the product. In
addition, the manufacturer and his
agent decline any responsibility in
the event of use, storage or
maintenance carried out in any
other way than described in this
manual.
that
the
IF THE BUYER IS NOT THE USER,
HE
MUST
and
the
INSTRUCTIONS TO THE LATTER.
Before use, it is essential to make
sure that the recommendations
concerning
associated with this product, as
defined in their manuals, are
complied
with.
in
possible, it is highly advisable to
attribute personally the PEP to one
and the same user. Make sure that
the device you have just acquired
is
compatible
recommendations of the other
components in the fall arrest
system. During use, protect your
PEP against any risks related to
the working environment: thermal,
electrical or mechanical shock,
protection of acid, etc.
Activities
at
dangerous disciplines which can
Check the
cause accidents and serious
injuries.
you are personally responsible in
the event of an accident, injury or
death during or subsequent to the
use of our products, concerning
with
the
yourself or a third party. The use
of
our
supervision and instruction of a
to
reread
these
competent
They
person is the best apprenticeship.
Learn about how to use this
opening carriage and make sure
you have understood its operation
entirely. In case of doubt, do not
take risks. Get the information you
need! Good physical condition is
mandatory to carry out works at a
height.
SEND
THESE
IMPORTANT RECOMMENDATION
If you have any doubts about the safety
of a product, or if it has been used to
arrest a fall, for your own safety, it is
essential to withdraw it from service and
each
element
return it to the manufacturer or to a
qualified
maintenance. Never attempt to modify
Whenever
or repair yourself any part of the lifeline;
the manufacturer or an approved
center are alone qualified to perform
such repairs. Be sure to fill out and
with
the
keep the opening carriage periodic
checking follow-up sheet.

MAINTENANCE AND STORAGE

Correct maintenance and suitable
storage of your Xenon carriage will
ensure the longevity of the product
while guaranteeing your safety.
sure
a
height
are
recommendations to the letter:
· Clean in water with a mild soap.
Always remember that
product
under
the
and
experienced
checking
center
for
Be
to
comply
with
these

Publicidad

loading