Gima SP-10 Manual De Usuario página 64

Note: The value determines the accuracy of measurement, please do NOT change it randomly. After
the turbine has been replaced, calibration shall be applied for inputting parameters of new turbine, which
guarantees the accuracy of measurement after turbine replaced.
Figure 25 Adjusting interface
Under [Calibration setting] interface, select "Exit" to return to [Settings] interface.
5. About device
Under [Settings] interface, select "About" to enter [About] interface. User can view device name and software
version. Press "Confirm" key to return to [Settings] interface.
6. Exit
Under [Settings] interface, select "Exit" to return to [Menu] interface.
Figure 26 Adjusting confirm interface
24