Honeywell MILLER 550 Manual De Instrucciones Para El Usuario página 17

Shock-Absorbing Lanyard Fall Clearance Calculation
[Calculation taken from connection point of lanyard to anchorage connector or anchorage]
+ Maximum Elongation/Deceleration Distance
+ Height to Worker's Back D-Ring
+ 3 ft. (.9m) Safety/Stretch Factor
= Required Fall Clearance
Self-Retracting Lifeline Fall Clearance Calculation
Maximum Arrest Distance
+ (Non-Standing Work Position Factor)*
+ (Swing Fall Factor)*
+ 3 ft. (0.9m) Safety/Stretch Factor
= Required Fall Clearance
Us er Ins tru ct ion s - Engl is h
Length of Lanyard
[Calculation taken from work level]
Safety/Stretch Factor
Contact Honeywell Technical Service:
1-800-873-5242 (press 4)
Safety/Stretch Factor
*The self-retracting lifeline fall clearance calculation
assumes the user is standing and performing work
directly below the anchor point; otherwise, addi-
tional fall clearance is required. Refer to I267--Miller
Self-Retracting Lifelines User Instruction Manual
for more information regarding the non-standing
work position factor and the swing fall factor.
Questions?
17