Product Identification - Leica Geosystems LASER ALIGNMENT DIGICAT 100 Manual De Empleo

TM
DIGICAT
Underground Service Location Tool
product and operating it.
en
Read carefully through the User Manual
before you switch on the tool.

Product identification

The type and the serial number of your
tool are indicated on the main label.
Write the type and serial number of your
tool in the space provided below, and
always quote this information when you
need to contact your dealer or service
workshop.
Type:
Serial No:
Copyright Notice
Copyright 2002 by Laser Alignment, Inc. All rights reserved
Laser Alignment Proprietary Information
The information/data contained herein is proprietary information of Laser Alignment, Inc.
and is furnished for your controlled use, and shall not be copied or otherwise repro-
duced, nor in any manner disclosed to any third party, without Laser Alignment, Inc.'s
prior written consent.
TM
DIGICAT 100 is hereinafter referred to as DIGICAT.
TM
DIGICAT 100 - 1.0.0en
100
This manual contains
important Safety Direc-
tions as well as instruc-
tions for setting up the
Symbols used in this manual
The symbols used in this User Manual
have the following meanings:
DANGER:
Indicates an imminently hazard-
ous situation, which, if not
avoided, will result in death or
serious injury.
WARNING:
Indicates a potentially hazardous
situation or an unintended use,
which, if not avoided, could result
in death or serious injury.
CAUTION:
Indicates a potentially hazardous
situation or an unintended use
which, if not avoided, may result in
minor or moderate injury and/ or
appreciable material, financial and
environmental damage.
Important paragraphs which must
be adhered to in practise as they
enable the product to be used in a
technically correct and efficient
manner.
4