Disposing Of The Battery - T'nB CAMERA SPORT S10 Modo De Empleo

If possible, follow these instructions to maximise battery life:
- Capture videos with lower frame rates and resolutions
- Use these settings:
HANDLING AND STORING THE BATTERY
The camera contains fragile parts, including the battery. It is therefore not
recommended to drop, disassemble, open, crush, bend, deform, inflate, pierce,
scratch, expose to microwaves, burn or repaint the camera, or insert objects
into the battery opening. Do not use the camera or battery if they have been
damaged, for example, if they are cracked, pierced or wet. If you disassemble or
pierce the battery, it may explode or catch fire. Avoid leaving your camera and
battery in excessive heat or cold. Temperatures that are very high or very low
can temporarily reduce battery life or prevent it from operating correctly. Avoid
sudden changes in temperature or humidity, as condensation may form inside
and outside the camera.

DISPOSING OF THE BATTERY

Lithium-ion batteries are recyclable. Check the current legislation and recycling
. locations where you live. When discarding lithium-ion batteries, cover the
ne terminals with tape, insulation, or packaging film to prevent them from coming
into contact with other metal objects and from catching fire during transport.
s TROUBLESHOOTING
or
"My camera does not turn on"
• Make sure your camera is charged. To charge it, use the USB cable provided
and a computer. You can also use a USB-compatible wall charger or car charger
hat (sold separately).
at • Also make sure that the battery is correctly inserted into its slot.
• To turn on the camera, press and hold the button for 3 seconds.
"The camera does not charge"
• Check that the cable is securely connected. An LED should light up.
• Check that the battery is correctly inserted into its slot. If necessary, remove
and re-insert it, using the flap.
"Playback on my computer is jerky»
Skips during playback are usually not due to files. If you notice image jumps,
one of the following reasons may be causing the problem:
- Using an incompatible video player
- The computer does not have the required system configuration for HD play-
back. The higher the resolution and frame rate of a video, the more it requires
ICE_SPCAMS10.indd 23
o Screen saver
o Automatic off
EN
23
03/09/2018 11