Safety Bar - bloom fresco chrome Manual Del Usaurio

eng
heaters and other sources of strong heat.
• Do not use the highchair unless all
components are correctly fitted and
adjusted.
• Always use the safety harness.
• Make sure harness is correctly fitted before
use.
• Always ensure the highchair is on a level,
stable surface before use.
• Always be sure your child is clear of the
highchair's moving parts before making
adjustments.
• Check the highchair regularly for damage
and to ensure that the harness is secure
and performs correctly. No lubrication is
necessary.
• Always check the tray is securely locked
in place by attempting to pull it free of the
highchair.
• IMPORTANT: Every time you place your
child in the highchair or whenever you alter
the position of the seat, always check that
the harness is correctly fitted. Tighten the
harness until it fits snugly around your child.
Footrest Assembly and Footrest Adjustment
IMPORTANT!
• DO NOT use footrest as a step.
• Suitable for use up to 24 months.
– (#11 footrest) Slide in footrest until you hear
an audible click Check footrest is secured by
pulling it downwards.
6
– To remove footrest, press button located on
the end of the footrest attached to the seat
unit, whilst sliding the footrest out of seat unit.
– The footrest has three height positions. Press
the button on the back of the footrest, whilst
sliding footrest up or down to your desired
position. The footrest is locked into position
when you hear an audible click. Check
footrest is secured by pulling it downwards.
(refer to illustration c1)
To install seat pad
– follow "To install seat pad & Safety Harness
Assembly" in section B.
– Adjust the length of the harness straps until it
fits firmly around your child.
To install Safety Bar, Seat Pad & Safety
Harness Assembly
– (#10 safety bar) Insert the both end of the
safety bar into the slot locate on both side of
seat unit. You will hear an audible click. (refer
to illustration c4)
– Insert the loop on the end of the crotch strap
through the upper hole of the crotch strap
cover at the end of crotch bar, and then put
the loose end under the crotch strap cover.
Then slide the crotch strap cover into the seat
unit. The strap and buckle must not be twisted
or inverted. This will ensure correct locking of
the harness. (refer to illustration c5)
– The seat can be reclined in three positions by
pulling the handle located at the back of seat.
(refer to illustration c6)
– To remove the safety bar, press and hold