CAMERA OPERATION
Slide the mode switch to TEST position to start the test mode.
• Press the UP key, then press SHOT to take video for test.
• Press the DOWN key, then press SHOT to take photo for test.
• Pressing the MENU button, the setup menu will be shown on the
LCD.
• Press the UP or DOWN key scrolls to the next or previous
parameter.
• Press the RIGHT or LEFT key to change the setting.
• Press the OK button to save the new setting.
• Press the MENU button to exit the SETUP menu.
Mode
Photo: Capture photos with motion detection.
Video: Capture video clips with motion detection.
Photo + Video: Capture both photos and video with motion detection.
Photo resolution
Set resolution for still photos. We recommend the resolution 5M.
Options: 1 MP, 3 MP, 5 MP (preset), 8 MP or 12 MP.
Photo series
Selects how many photos are taken in sequence per trigger. In
addition to single shot mode (1 photo), you can take "2 photos in
series" or "3 photos in series".