distianert DH-8 Manual De Instrucciones página 14

CAMERA OPERATION
Caution! Make sure you have downloaded and backed up any
files you want to preserve first! Press OK to execute, press MENU
to exit without formatting.
Serial NO
Select "On" if you want to use a serial number to rank the camera. You
can set a 4-digit combination. This helps multi-camera users identify
the location when reviewing the photos, since each camera will imprint
its number on all photos it captures.
Reset setting
Select 'Yes' and press OK to restore all parameters to the original
factory default settings.
Aligning the camera
In test mode you can work out the optimum exposure angle and the
range of the motion sensors.
► During alignment, consider whether the use of the side motion
sensors may be useful for attaining the desired observation results.
You can activate/deactivate the side motion sensors using the
above-described menu.
Align the camera as follows:
Fasten the camera to a tree or similar object at a height of 1–2 meters
and align the camera in the desired direction. Then move slowly from