distianert DH-8 Manual De Instrucciones página 12

CAMERA OPERATION
off the side sensors.
Sensitivity motion sensors
The sensitivity of the main motion sensor is set here. For interior areas
and environments with little interference, such as branches blowing in
the wind, select "High". Select "Medium" for exterior areas and
environments with a normal amount of interference, and select
"Low"for environments with a high level of interference. The
temperature can also affect the sensitivity. The "High" setting is
suitable for warm ambient temperatures, whereas "Low" should be
selected for cold Environments.
Target recording time
Select "On" if the camera should only be
active during a certain time period. In
the screen menu that subsequently
appears, you can then set the start and
end time for the active phase. The
settings made here apply every day.
The camera will not record any images outside of the active phase.
Time lapse
Time lapse mode disables the PIR
sensor and instead takes photo or
records video clip automatically at