Casit CAS2B Manual Tecnico página 15

CAS2B - CAS3
CHECKING THE DOOR
To ensure that the automation operates correctly, the door must be free of obstructions due to incorrect mounting
or malfunctions caused by lack of lubrication on the centres of rotation and mechanical runners.
Installation
To install the automation, follow procedures and the illustrations shown below:
Join the guide (P2 Fig. 1) using the guide joint (P3 FIG. 2).
P3
P2
Fig. 2
Fig. 1
Insert the chain or belt on the gear located on the motor base (Fig. 3) and fix the guide (Fig. 4).
Fig. 4
Fig. 3
Run the idler unit of the chain or toothed belt (Fig. 5) up to the point of the guide,
insert the chain tightener unit (Fig. 6) and adjust the chain tension (Fig. 7).
Fig. 5 Fig. 7
Fig. 6
Attention!!!
Check the movement of the trolley
Pagina 5 di 10 Rev. 05 del 19/2/2009