Boss SP-505 Manual Del Usuario página 84

Tabla de contenido

Publicidad

Capítulo 15. Apéndices
Channel Mode Message
All Sound Off (Controller No.120)
Status
Second
BnH
78H
n = MIDI Channel Number: 00H - 0FH (ch.1 - ch.16)
* All Current active voice in the specified channel will be shut off.
System Common Message
Song Position Pointer
If the system parameter "SYSTEM/UTILITY/MIDI" setting "MIDI Sync Mode" is set to
"MIDI/AUTO," Song Position Pointer messages are received when stopped.
Status
Second
F2H
mmH
nn, mm = Song Position Point: 00H 00H - 7FH 7FH
Song Select
Status
Second
F3H
ssH
ss = Song Number: 00H-13H (0-19)
System Realtime Message
Timing Clock
This message is received when the "MIDI Sync Mode" of the system parameter "SYSTEM/
UTILITY/MIDI" is set at "MIDI/AUTO".
Status
F8H
Start
This message is received when the "MIDI Sync Mode" of the system parameter "SYSTEM/
UTILITY/MIDI" is set at "MIDI/AUTO/REMOTE".
Status
FAH
Continue
This message is received when the "MIDI Sync Mode" of the system parameter "SYSTEM/
UTILITY/MIDI" is set at "MIDI/AUTO/REMOTE".
Status
FBH
Stop
This message is received when the "MIDI Sync Mode" of the system parameter "SYSTEM/
UTILITY/MIDI" is set at "MIDI/AUTO/REMOTE".
Status
FCH
Active Sensing
Status
FEH
* Whenever the SP-505 receives this message, it monitors the interval of the incoming
data.If the subsequent message has not arrived within about 400 ms after the previous
data it processes all tracks as though it has received All Sound Off, and mutes the
sounding voices, then stops monitoring receiving interval.
84
Third
00H
Third
nnH
System Exclusive Message
Status
Data Bytes
F0H
iiH, ddH, ..., eeH
Byte
Description
F0H
Status of System Exclusive Message
ddH
Data: 00H - 7FH (0 - 127)
:
:
eeH
Data
F7H
EOX (End of System Exclusive Message)
Universal System Exclusive Message
INQUIRY MESSAGE
Identity Request
Status
Data Bytes
F0H
7EH, 7FH, 06H, 01H
Byte
Description
F0H
Status of System Exclusive Message
7EH
Universal System Exclusive Message Non Realtime Header
7FH
Broadcast
06H
General Information (sub-ID #1)
01H
Identity Request (sub-ID #2)
F7H
EOX (End of System Exclusive Message)
The message is used to request the particular information of the SP-505.
The SP-505 does not transmit the message.
If the SP-505 received the message, the SP-505 transmits the prescribed Identity Reply
message.
2. TRANSMITTED DATA
Channel Voice Message
Note On/Off
Transmit the note on/off in the MIDI channel number which is designated with "Pads
Channel" or "Part1-4 Channel" in the system parameter "SYSTEM/UTILITY/MIDI".
Status
Second
9nH
mmH
n = MIDI Channel Number:
mm = Note Number:
ll = Velocity:
Pad bank (#1) receive note numbers 23H (35).
Pad Number
Note Number
Pad EXT
35 (23H)
Pad banks (#1-12, #17-32) receive note numbers 23H-33H (35-51).
Pad Number
Note Number
Pad 1
36 (24H)
Pad 2
37 (25H)
Pad 3
38 (26H)
Pad 4
39 (27H)
Pad 5
40 (28H)
Pad 6
41 (29H)
Pad 7
42 (2AH)
Pad 8
43 (2BH)
Pad 9
44 (2CH)
Pad 10
45 (2DH)
Pad 11
46 (2EH)
Pad 12
47 (2FH)
Pad 13
48 (30H)
Pad 14
49 (31H)
Pad 15
50 (32H)
Pad 16
51 (33H)
Status
F7H
Status
F7H
Third
llH
00H - 0FH (ch.1 - ch.16)
23H - 48H (35 - 72)
01H - 7FH (1 - 127) / 00H = NOTE OFF
GS TONE KICK 1
GS TONE SIDE STICK
GS TONE SNARE 1
GS TONE HAND CLAP
GS TONE SNARE 2
GS TONE LOW TOM 2
GS TONE CLOSED HH
GS TONE LOW TOM 1
GS TONE PEDAL HH
GS TONE MID TOM 2
GS TONE OPEN HH
GS TONE MID TOM 1
GS TONE HI TOM 2
GS TONE CYMBAL
GS TONE HI TOM 1
GS TONE Ride Cymbal 1

Publicidad

Tabla de contenido
loading

Tabla de contenido