Air Adjustment - Ecoflam MAIOR P 700.1 PR Manual Del Usuario

420010300700 Maior P 700.1 / 1200.1 PR
EN
Position the selector, situated on the control panel, on position 2 and proceed as follows:
Adjustment the minimum light oil flow rate (see figure, Nozzle diagram):
- using a suitable allen key, change the position of the cam guide blade; screwing the cam in, the light oil
flow increases, while unscrewing it, it decrease.
Adjustment the minimum air flow rate (see figure, detail 1):
- loosen the Allen screw on the air damper clamp;
- turn the air damper until you reach the correct air flow, as established by analyzing
the combustion process.
- tighten the Allen screw in place once again.
Position the selector, situated on the control panel, on position 1 and proceed as follows:
Adjustment the maximum light oil flow rate (see figure, Nozzle diagram):
- using a suitable allen key, change the position of the cam guide blade ; screwing the cam in, the light oil
flow increases, while unscrewing it, it decrease.
Adjustment the maximum air flow rate (see figure, detail 2):
- loosen the nut holding the air damper transmission rod;
Using the selector, start the servomotor (closing or opening) and position on 0 to stop the stroke; the adjust-
ment is made as outlined below. Repeat the operation for the other cam points.
Adjustment the intermediate light oil flow rates (see figure, detail 3):
- using a suitable Allen wrench, change the position of the cam guide blade; if you screw it
down, the flow rate is reduced; if you unscrew it, the flow rate increases.

AIR ADJUSTMENT

Part. 1
- -
+
Part. 2
MINIMUM CAPACITY ADJUSTMENT OF THE BURNER
MAXIMUM CAPACITY ADJUSTMENT OF THE BURNER
ADJUSTMENT THE INTERMEDIATE BURNER CAPACITIES
FIRING HEAD SETTING
- -
SELECTOR
COMMUTATORE
+
0
0 =
=
Part. 3
=
AUTO =
26
AUTO
operating elements locked in an
bloccaggio degli apparati per il
intermediate position
funzionamento in una posizione intermadia
operation on maximum capacity
funzionamento alla massima potenza
operation on minimum capacity funzionamento alla minima potenza
automatic operation
funzionamento automatico