9
Taking the machine out of operation and disposing of it
9.1 Taking the machine out of operation
► Switch the machine off.
► Pull the power plug.
► Remove the compressed air hose from the compressed
air source.
► Remove the compressed air hose from the maintenance
unit.
► Open the front plate.
► Remove the ferrule belt from the transport unit.
► Turn the ferrule role anti-clockwise until the ferrule belt is
completely removed from the machine.
► Remove the ferrule role.
► Only RS: Empty the waste container and put it back into
the machine.
► Close the front plate.
► Pack the machine in the original packaging.
The machine is now ready for transport and, if necessary,
disposal.
9.2 Disposing of the machine
► Take the machine out of operation as described in sec-
tion 9.1.
► Make sure that the machine is disposed of in accord-
ance with national and local regulations.
The machine must not be disposed of as
domestic waste.
The machine must be disposed of in an
environmentally-friendly and professional
manner.
You can send the machine to Weidmüller for dis-
posal. Refer to the representative responsible for
your country.
2549630000/00/09.2017
45