Phase
Days 2 thru 4 - Continue Boundary Awareness
2
Introduction to Static Correction
Perform three training sessions per day, each lasting 10-15 minutes.
Goal:
To train your pet to stay in the Pet Area and respect the boundary.
Setup:
• Program the Static Correction Level on the Receiver Collar to Level 2 and place it on your pet's neck.
• Put a separate non-metallic collar on your pet's neck ABOVE the Receiver Collar and attach a leash.
CAUTION
• Have tiny pieces of treats available (hot dogs or lunch meat work well).
• Have your pet's favorite play toy available.
Steps:
1. Repeat steps 1-5 in Phase One.
2. If your pet does not respond to the Static Correction, confirm that the Receiver Collar is fitting properly
according to Step 9 on page 17.
3. If the Receiver Collar is fitted properly and your pet does not respond to the Static Correction,
increase the Static Correction Level by 1. Watch for slight reactions at first such as ears up,
head turned, looking at the ground.
4. Stay at the same flag until your pet resists going into the Static Correction Zone.
Be sure the extra collar does not put pressure on the Contact Points.
www.petsafe.net
21