Technical Data - Shofu VINTAGE Halo Instruciones De Uso

Ocultar thumbs Ver también para VINTAGE Halo:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 34
VINTAGE HALO porcelain has been tested in accordance with EN/ISO 9693 and
fulfils the requirements of the standard.
Coefficient of thermal expansion (CTE 25 °– 500 °C):
PASTE-OPAQUE, POWDER-OPAQUE
2. firing 14.0 x 10
-6
4. firing 14.1 x 10
-6
OPAQUE-DENTINE, BODY, INCISAL, OPAL INCSAL, TRANSLUCENT,
EFFECT, MODIFIER, ADD-ON
2. firing 12.6 x 10
-6
4. firing 12.8 x 10
-6
Glass Transition Temperature (°C):
PASTE-OPAQUE, 590 °C
POWDER-OPAQUE, OPAQUE-DENTINE, BODY, INCISAL, OPAL INCISAL, TRANS-
LUCENT, EFFECT, MODIFIER, ADD-ON, 580 °C
Alloys:
VINTAGE HALO porcelain can be used in conjunction with alloys which have a CTE
of 13.5 – 14.4 x 10
ding the cooling time. Therefore alloys can also be used with CTE (25 ° – 500 °C)
– 14.7 x 10
-6
x k.
Au-Pt alloys
Herador H (Heraeus)
CTE (25 ° – 500 °C) 13.9
Normal cooling
Storage:
Protect the porcelain powder from humidity.
Store paste porcelain at room temperature (15 ° – 25 °C).
The System:
These instructions are valid for the following components of the
VINTAGE PORCELAIN System:
VINTAGE HALO BASE-SET (15 g/50 g)
Opaque-Dentine, 19 colours, Body 19 colours, Opal Incisal 6 colours,
Incisal Standard 6 colours, Correction powder 2 colours, Colorindicator (No. 1, 2, 3),
GUMY
®
L, M, D.
VINTAGE HALO POWDER OPAQUE-SET (15 g)
Powder Opaque 19 colours, Mixing-liquid Opaque 50 ml
VINTAGE HALO PASTE OPAQUE-SET (3 g)
Paste Opaque 19 colours, Paste- Modifier 3 colours, Modelling-liquid 3 ml,
1 Brush No. 5 (Nylon)
VINTAGE HALO OPAL FULL-SET (15 g/50 g)
Opal Incisal and Effect powder 10 colours, 1 Colorindicator No. 2
VINTAGE HALO INTRO-SET (15 g, Colour A2, A3, A3.5, B2, B3)
Per each Set: Paste Opaque 1 colour, Opaque-Dentine 1 colour, Body 1 colour,
Opal Incisal 1 colour, Opal Translucent, 1 Brush No. 5 (Nylon)

Technical Data

-6
(25 ° – 500 °C). The CTE of the porcelain can be adjusted by exten-
Pd alloys
Duopal 6 (Wieland)
CTE (25 ° – 500 °C) 14.1
Normal cooling
19
Np alloys
Uni Metall II (SHOFU)
CTE (25 ° – 500 °C) 14.0
Normal cooling
english

Publicidad

Tabla de contenido
loading

Tabla de contenido