Frame Mounting - Bradley Verge LVLD Serie Manual Del Usuario

LVLD1
1

Frame Mounting

Typical installation is shown. It may be necessary to repair the wall
after mounting. The fixture may not cover all of the wall modifications.
16"
(406mm)
centers
13"
(330mm)
A
Finished Floor
Fasteners (supplied by installer)
to secure backing to studs
8
The frame and the bowl
A
must be adequately
supported.
Drywall
D
6/2/2016
Support Backing Mounting
Standard Height, ADA and TAS
ADA, Juvenile and TAS, Grades
Drain, supplies and electrical box are
shown in their approximate locations.
B
Cut clearance holes in the backing as
required.
NOTE: Backing should equal the
thickness of the drywall (½" minimum).
19-1/2"
(279mm)
Use 3/8" fasteners and square washers
provided to secure the frame to the backing
(5) places. Shim frame as necessary.
Bradley • 215-1777 Rev. F; ECN 16-08-008
"A" Dimension
Height
20" (508mm)
17" (432mm)
6 thru 12
If needed, shim the
frame at anchor points to
C
ensure the offset bracket
is straight. Leave the
top screw loose for bowl
installation.
Installation